Novel local smoothness indicators for improving the third‐order WENO scheme

The local smoothness indicators play an important role in the performance of a weighted essentially nonoscillatory (WENO) scheme. Due to having only 2 points available on each substencil, the local smoothness indicators calculated by conventional methods make the third‐order WENO scheme too dissipative. In this paper, we propose a different method to calculate the indicators by using all the 3 points on the global stencil of the third‐order WENO scheme. The numerical results demonstrate that the WENO scheme with the new indicators has less dissipation and better resolution than the conventional third‐order WENO scheme of Jiang and Shu for both smooth and discontinuous solutions.     

基于局部加密纯无网格法非线性Cahn-Hilliard方程的模拟

为数值求解描述不同物质间相位分离现象的高阶非线性Cahn-Hilliard(C-H)方程,发展了一种基于局部加密纯无网格有限点集法(local refinement finite pointset method,LR-FPM).其构造过程为:1)将C-H方程中四阶导数降阶为两个二阶导数,连续应用基于Taylor展开和加权最小二乘法的FPM离散空间导数;2)对区域进行局部加密和采用五次样条核函数以提高数值精度;3)局部线性方程组求解中准确施加含高阶导数Neumann边值条件.随后,运用LR-FPM求解有解析解的一维/二维C-H方程,分析粒子均匀分布/非均匀分布以及局部粒子加密情况的误差和收敛阶,展示了LR-FPM较网格类算法在非均匀布点情况下的优点.最后,采用LR-FPM对无解析解的一维/二维C-H方程进行了数值预测,并与有限差分结果相比较.数值结果表明,LR-FPM方法具有较高的数值精度和收敛阶,比有限差分法更易数值实现,能够准确展现不同类型材料间相位分离非线性扩散现象随时间的演化过程.     

通过表面机械加工调控Zr52.5Cu17.9Ni14.6Al10Ti5非晶合金的结构和韧性

作为一种新型结构材料, 非晶态合金的韧性需要进一步提高. 提高非晶态合金韧性的方法有引入枝晶相、调整其成分改变其泊松比影响其剪切带衍生、裂纹扩展等.本文通过表面机械加工的方法来调控非晶态合金的微观结构及韧性. 我们采用真空电弧熔炼、亚稳态薄板离心浇铸系统制备了Zr_52.5Cu_17.9Ni_14.6Al₁₀Ti₅ (原子百分比) (Vit105)非晶合金板,并用表面机械研磨处理方法(surface mechanical attrition treatment, SMAT), 在Vit105板上形成纳米尺度局域类晶体序结构. 基于差示扫描量热分析、纳米压痕实验, 我们发现SMAT处理后的Vit105合金板表面附近弛豫焓更低, 微观结构更加均匀、稳定. 通过显微维氏硬度计测试, 发现SMAT处理后样品的表面附近硬度增大,硬度值分布也更均匀. 通过三点弯断裂实验, 可得到SMAT处理后合金板缺口韧度值从70.7 ± 4.7 MPa·m1/2提高到112.8 ± 3.7 MPa·m1/2. SMAT处理后合金板断裂后, 缺口前端剪切带密度比未处理的更大. Vit105合金板韧性的提高源于SMAT处理对剪切带萌生的促进作用. 该研究表明,表面机械加工可以在非晶态合金中形成局域类晶体有序结构, 影响其结构均匀性, 增大其硬度, 促进剪切带萌生, 提高其韧性. 表面机械加工作为一种新型的改变材料性能的手段, 具有广阔的应用前景.      

Nonlinear Jordan Higher Derivations of Triangular Algebras

In this paper, we prove that any nonlinear Jordan higher derivation on triangular algebras is an additive higher derivation. As a byproduct, we obtain that any nonlinear Jordan derivation on nest algeb...     

图的局部k限制边连通性及最优性

首先研究图的局部k限制边连通性问题和局部λ_k-连通图的存在性问题.然后研究图的局部λ_k最优性,并且应用邻域条件得到了一个保证图局部λ_k最优的充分条件.     

多孔介质结构对渗流惯性效应的影响规律研究

本文通过局部展开算法研究了多孔介质中排列结构对非线性渗流规律的影响．计算结果表明：规则排列结构的渗流标度律和渗流方向相关，然而非规则排列结构的渗流标度律不依赖于渗流方向而只依赖于多孔介质的几何结构．伴随着排列结构的非规则程度增强，不同方向的渗流阻力变化规律的差异性减小．当流场输运区域较为复杂且不存在较宽直通道时，渗流阻力在较宽雷诺数范围内体现出较为明显的标度律特性．周期性强非规则排列结构中不同区域大小的模型却具有相似的渗流阻力的标度律特性，同时标度律特性与孔隙度的大小相关性不大．阻力非线性标度律由多孔介质结构的不同而取值为2至3之间．     

Statistical causality,martingale problems and local uniqueness

The paper considers a statistical concept of causality in continuous time in the filtered probability spaces which is based on the Granger’s definition of causality. The given causality concept is then applied to the solution of the martingale problem (associated with the stochastic differential equation driven with semimartingales). More precisely, we show that the given causality concept is closely connected to the concept of extremality of measures for the solutions of the martingale problem, for the stopped martingale problem and for the local martingale problem. We also show the equivalence between some models of causality and local uniqueness (for the solutions of the martingale problem).     

On the Rayleigh-Plateau instability

In this paper,we study the surface instability of a cylindrical pore in the absence of stress. This instability is called the Rayleigh-Plateau instabilty. We consider the model developed by Spencer et ...     

Local existence-uniqueness and continuation of solutions for delay stochastic evolution equations

In this article, we consider dynamic behaviours of a class of non-linear delay stochastic evolution equations. Local existence and uniqueness of the solutions are obtained with the aid of proper iterative scheme and moment estimations. We also propose a continuation result and our results generalize the known results.